POOLS AND SPAS

Pools and Spas

JP101

JP101 with remote electrical box. Pipe connection sizes are from 2" down to 3/4".

This product is most suitable for installation on spas and hot tubs as it virtually

eliminates the use of chemicals.

The JP 102 has a top mount ballast box and is usually installed where space is

not a problem. ie: in pool houses, flat wall surfaces or any place where it does

not have to be removed for servicing.

The JP103 and the JP 102 share the same over all outside configuration, but that is

where the similarity stops. The above picture shows the true UV MONITORING

SYSTEM housed in the top mount ballast box of the JP 102. When the UV OUTPUT

drops below the amount required to maintain peak germicidal frequency, an alarm is

triggered and the JAC PAC emits a loud squealing sound. A yellow LED also comes

on in case the JAC PAC is placed in a noisy location thereby allowing for visual

monitoring as well.

Tandem unit for pools up to 20,000 gallons in size.pipe size 1 1/2" to 2'.

The JP 106 is a twin pack of the JP 104 with the exception that it only comes with

the alarm system. The JP 106 was originally designed for larger pools but has found

its way into many other areas. Some of these include: large out door ponds, process

water in food plants, large waterscapes as well as waste water treatment tanks.